Conductivity Type Level Switches |
| Salient Features : |
- No moving part, free from maintenance.
- No special cable required for signal transmission, ECONOMICAL to install
- Long cable connection permissible between probe and evaluation unit.
- AC on probes for prevention of electrolytic deterioration of electrodes.
- Low voltage on probe for operational safety.
- Variety of control functions and installation system available, beside single point switching.
a] Two point action for automatic pump control.
b] Two point independent switching.
c] Three point switching, two points with pump control logic and one independent point
d] Four point switching having two-pump control logic.
- Variety of probes available for various process conditions.
- Multichannel -4 point independent switching available for various process conditions.
|
| Technical Specifications (Standard) : |
| SWITCHING UNIT : |
| Housing: Aluminum, weather proof, powder coated. for back panel mounting /DIN Rail mounting |
| Cable entry: 3 nos. |
| Ambient temperature: 0 ° C to +60° C |
| Power consumption: 1.9 VA |
| Mains Voltage: 230/110 V AC (+/-15%), 50 Hz or 24 V DC (ON REQUEST) |
| Output: 1 sets of potential free c/o contacts rated at 10 amps, 250 V AC for non-inductive loads. |
| Safety operation: Field selected switch over for min. or max. (FSL/FSH) switching points. |
| Switch status display: Green LED shows Normal, Red LED shows alarm. |
| Response Time: 0.5 Sec |
| Weight: 1.5 Kg Cast Al. |
