Electromagnetic Type Flow Meter   Service : All type of conductive liquids. (minimum conductivity 5 µS/cm) Working Principle : Faraday's law of electromagnetic induction.  Range : 5 to 10000 LPM Pipeline Size : 10 mm up to 350 mm in Full Bore Type and Insertion Type for line size above 350 mm Accuracy : 0.5% of the reading in case of full bore type and 2% of the reading in case of insertion type. Min. Velocity : 0.5 Meter per second Material of Construction : Full Bore Type Insertion Type Flow Pipe SS 304 - Sensor SS 316 or special SS 316 or special
	Flow Meter Housing CS, SS 304 or SS 316 - Insulation Material Hard Rubber, PTFE PTFE Flanges CS or special - Flow pipe SS 304 - Socket - CS - weld on type (1.1/4" BSP-F) Nipple - SS 304 (1.1/4" BSP-M) Isolation Valve - SS 304 Ball Valve Probe Holder with Flange - SS 304 Top Flange and Tie Rods - SS 304 Earth Connection Copper Lug Suitable for 16 mm2 wire Copper Lug Suitable for 16 mm2 wire       Flow Indication : Digital Transmitter unit : Integral or Remote Mounted Indicator unit : Integral or Panel Mounted Enclosure : Water Proof (IP 65) or Flameproof Max. Working Temperature : 120 degree C Max. working pressure : 40 bar in full bore type and 15 bar in insertion type. Power Supply : 230 V AC) Applications : Indication of flow rate passing through the pipeline Enquiry Form Products   Full Bore Type Electromagnetic Flow Meter Insertion Type Electromagnetic Flow Meter     Top   Mechanical Flow Gauge | Turbine Type I Electromagnetic Type Positive Displacement Type I Ultrasonic Type (through pipeline) | Ultrasonic Type (Through Open Channel)   Pressure & Vacuum  |  Differential Pressure  |  Temperature  |  Level Flow & Velocity  |  Conductivity & PPM  |  Density